CP12170 12V 17Ah(20hr)
The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position.
General Features
● Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding.
● Not restricted for air transport-complies with IATA/ICAO Special Provision A67.
● UL-recognized component.
● Can be mounted in any orientation.
● Computer designed lead, calcium tin alloy
grid for high power density.
● Long service life, float or cyclic
applications.
● Maintenance-free operation.
● Low self discharge.
Dimensions and Weight
Length(mm / inch) 181 / 7.13
Width(mm / inch) 77 / 3.03
Height(mm / inch) 167 / 6.57
Total Height(mm / inch) 167 / 6.57
Approx. Weight(Kg / lbs) 5.3 / 12.5 ±%5
Performance Characteristics
Nominal Voltage 12V
Number of cell 6
Design Life 5 years
Nominal Capacity 77oF(25oC)
20 hour rate (0.85A, 10.5V) 17Ah 12Ah
10 hour rate (1.63A, 10.5V) 16.3Ah
5 hour rate (2.94A, 10.5V) 14.7Ah
1 hour rate (12A, 9.6V). 12Ah
Internal Resistance
Fully Charged battery 77oF(25oC) 16mOhms
Self-Discharge
3% of capacity declined per month at 20oC(average)
Operating Temperature Range
Discharge. -20~60oC
Charge -10~60oC
Storage -20~60oC
Max. Discharge Current 77oF(25oC) 225A(5s)
Short Circuit Current. 850A
Charge Methods: Constant Voltage Charge 77oF(25oC)
Cycle use 2.30-2.35VPC
Maximum charging current 6.8A
Temperature compensation -30mV/oC
Standby use 2.23-2.27VPC
Temperature compensation. -20mV/oC
Click below to download brochure
|